亚洲AV秘无码18自慰,精品一区二区三区视频,国产欧美日韩在线视频不卡,9久9久女女免费视频精品

Thyristor, which is what we call thyristor module, has a wide range of applications in the field of circuits, and is well received by users. Of course, if you want to make the thyristor work better, it is very important to understand its use requirements before using it. important. Next, let's take a look together.

Five requirements to be met when using thyristors:

1. When the thyristor controls the load of the transformer, if the transformer is unloaded, the output current may be less than the holding current of the thyristor chip, resulting in a large DC component in the loop, and in severe cases, the fuse may be burned. Of course, in order to avoid the above situation, you may wish to connect a fixed resistor to the output terminal of the module. Generally speaking, the output current of each phase is not less than 500mA. The specific data can be determined according to the test situation.

2. It is strictly forbidden to directly crimp the copper wire of the cable to the electrode of the module to avoid additional heating due to poor contact.

3. When measuring the working case temperature of the thyristor module, the test point should be the surface of the radiator close to the core of the module bottom plate. A deep hole can be made transversely below the surface of the radiator to the core of the radiator, and the thermocouple probe is inserted into the bottom of the hole. It is required that the temperature of the test point should be ≤80℃.

4. The main electrode of the small-sized thyristor module is fastened without screws, and it is easy to be lifted and broken. Therefore, during the wiring process, be sure to pay attention to the external force on the surface or the gravity of the cable to pull the electrode up and break it.

5. The thyristor module cannot be used as an isolating switch. In order to ensure safety, an air switch must be added in front of the input end of the module for better use.

In short, the use of thyristors should not be underestimated. In order to ensure the normal operation of thyristors, the above requirements must be specifically understood.